メインコンテンツにスキップ

Here are the repair guides for Xiaomi Redmi Note 4X

36回答 すべてを表示

Can't charge my phone.

Hello and sorry for my English! My phone is Xiaomi Redmi Note 4 (MTK). Few days ago I plugged my phone into the car USB charger through a cigarette lighter and nothing happend - phone wasn't charging , so I unplugged it and 2 hours later i wanted to plug it in my home to wallcharger and nothing happend again. I tried with 3 others chargers and USB cables, but it still wasn't charging (Other phones are normally charging with all of this chargers) Then i tried connect it to PC but still noting happend. Phone was slowly dying with battery, but it works - i mean screen, speaker, camera etc. I put that phone into the wallcharger to night and it charged to 12% but was very hot. Then it died again (after slowly discharge) . Then I swapped USB port (this litte plate) to the new one, but that didnt help. Can someone help me with that issue?

Update (03/24/2018)

Block Image

I swapped this, because i have Redmi Note 4 on MediaTek. But still can't charge my phone.

Is there any chance that flex which connect main board with this usb port board is broken? I mean exactly - CM855_MAIN_FPC_V2.0?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

Hi i have a xiaomi note x4 and my charging cable doesnt work what should i do .it works with other cable.

さんによる

コメントを追加

1 件の回答

最も参考になった回答

Do you try to change usb cables?

if the usb cable be good, Try to change the whole charging port board and change car charger, because it might blow up a capacitor.

Block Image

このアンサーは役に立ちましたか?

スコア 2

11 件のコメント:

Hello! Yes I tried with 3 different cables but it still wasn't charging. I swapped charging port board to the new one but that didnt help as well. Is there any chance that this factory new one is already broken? Maybe there is something more that can be broken.

さんによる

It might be a tiny small capacitor in the upper logic board. Difficult to change it....

さんによる

there is a chance to have broken flex cable, but is rare...

さんによる

Hmmm. I dont know what to do right now ....

さんによる

put charger on it , take mutimeter and count the main board the fisrt parts that come after the flex cable to check if the flex cable is good.

さんによる

6件以上のコメントを表示

コメントを追加

回答を追加する

Mzeke さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 8,594