メインコンテンツにスキップ

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

iPhone 6 pentalobe screws

I have replaced few iPhone 6 screen and I've noticed, those pentalobe screws don't attach tight everytime and sometimes they just keep spinning and don't get tight. What do I do wrong with them? I do get them off, but with tricks and not normal way.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

3件の回答

ベストアンサー

Try this liberation kit: [リンクされた製品が存在しない、もしくは無効: IF118-034]

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

I have bigger iFixit kit. Does this offers something special to pentalobe problem?

さんによる

@saltwater well YES! It replaces all the Pentalobe screws with Phillips screws.

さんによる

コメントを追加
最も参考になった回答

Well what I experienced a lot of times is the following:

So sometimes when I screw them in the, display is not completely down so the screws don't get in the hole.

My advise is to apply light pressure on the screen under the home button and than try to screw them in.

Maybe this works, I hope so. If not let me know.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

They're very delicate screws and if you or anyone else overtightened them they will strip easily. You cold try putting a bit of extra Loctite (thread locker) on the threads. It's important to develop a delicate touch when dealing with all of these tiny screws.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

Ok, I see. Does this mean that in such event screw itself breaks a bit and needs to be changed or does overtightening break the hole/thread itself?

さんによる

Could be both, you will need to look closely at the screws to see if they are damaged and see if new ones grip well in the "holes".

さんによる

コメントを追加

回答を追加する

Marko Himanka さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 132