CPU Heatsink motherboard mount broke off

Question

MSI

MSIによって製造されたラップトップモデルの修理ならびにサポートガイド。

269回答すべてを表示

Leo Sup @leosup

評価: 11

投稿日: 2018年3月5日

オプション

CPU Heatsink motherboard mount broke off

Hi guys,

I have a medion x7813 (similiar to the MSI GT70) and one of the 3 CPU heatsink mount just broke, this is causing my CPU to run very hot since the contact between the CPU and heatsink is far from good.

Here are some images to show you my problem :

https://imgur.com/a/wPkIG

So how do i fix this ? I was thinking of using epoxy resin or superglue to stick it in place but i don't know if this is the best solution or if it will even work.

Thanks for the help :)

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

Conor Bailey @thethirdtwin

評価: 7.9千

Tech Haus

13

9

投稿日: 2018年3月5日

オプション

Any sort of non conductive adhesive would work, superglue could be an option, being careful not to cover any components. Maybe if you glue it on on the bottom side.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

5 件のコメント:

You think this will work even with the force exerted by the heatsink since the contact zone is pretty small ?

Leo Sup さんによる2018年3月5日

The best option would be to buy a new board but given it may be saved by a bit of glue or epoxy, I’d say it would do the job.

It’s the cpu bracket that holds the most tension the heat sink just sits on top and needs to have an even spread of surface area around the cpu, the lack of stand-off means the heat is distributing unevenly, really you could go Linus tech tips and used a cable tie for all the difference it would make, but plz don’t do that.

Let me know if this helps.

Conor Bailey さんによる2018年3月5日

I went with the epoxy and right now it's working great, thanks for your help mate :)

Leo Sup さんによる2018年3月8日

Nice, good job.

Conor Bailey さんによる2018年3月9日

Hi so how is it now? Is it still intact? What kind of epoxy did you use? Because i think some epoxy are electrically conductive. I have the same issue i found out when im repasting my gpu and cpu and im looking for a good fix. Thanks

Joe Barcenas さんによる2020年6月11日

コメントを追加

You think this will work even with the force exerted by the heatsink since the contact zone is pretty small ? — Leo Sup
The best option would be to buy a new board but given it may be saved by a bit of glue or epoxy, I’d say it would do the job.

It’s the cpu bracket that holds the most tension the heat sink just sits on top and needs to have an even spread of surface area around the cpu, the lack of stand-off means the heat is distributing unevenly, really you could go Linus tech tips and used a cable tie for all the difference it would make, but plz don’t do that.

Let me know if this helps. — Conor Bailey
I went with the epoxy and right now it's working great, thanks for your help mate :) — Leo Sup
Hi so how is it now? Is it still intact? What kind of epoxy did you use? Because i think some epoxy are electrically conductive. I have the same issue i found out when im repasting my gpu and cpu and im looking for a good fix. Thanks — Joe Barcenas

MSI

CPU Heatsink motherboard mount broke off

1 件の回答

回答を追加する