メインコンテンツにスキップ

Solder points for wires to speaker

I have a pair of Beats mixr headphones with the aux cable soldered straight to the speaker (don’t know why). A wire from the wider cable and a wire from the aux cable have deattached and I would like to see a tear down to see where to re-solder the wires onto the speaker. I can’t take out the Monster cable (it’s actually a genuine cable), and one ear works. The other ear has another aux port. When I use another aux cable, the ear that doesn’t work with the other cable works, but not the one that worked last time. So I have to use a headphone splitter and plug in both cables for both ears to work. But that’s a pain. How would I re-solder the deattached wires? An image of the disconnected wires is below.

Block Image

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
2 件のコメント

@dudeperson post some images of where you see the wires disconnected etc. with your question. Use this guide iFixitでの質問に画像を追加する方法 for that so that we can see what you see.

さんによる

Alright added a photo.

さんによる

コメントを追加

1 件の回答

ベストアンサー

@dudeperson use a multimeter and see if you have continuity between point 3 and 4. Measure between 1 and 3 and 2 and 3 and make sure that you do not have continuity. If those points are true you can solder the ground wire to point 3 or just solder it above or with the ground wire (green arrows) coming from the input cable.

Block Image

このアンサーは役に立ちましたか?

スコア 4

4 件のコメント:

I won't be able to try this until about March 17th.

さんによる

@dudeperson that is fine. Absolutely no problem Somebody will be here to help you out:-).

さんによる

I tried it. I edited the photo to what we tried.

さんによる

Looks like I missed the other wire . Try to connect that to #3 if that does not work connect to bottom of #2 with the green wire.

さんによる

コメントを追加

回答を追加する

Jackson Blade さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 7

今までの合計 1,324