メインコンテンツにスキップ

The ZTE ZMax Pro is identified by its black color, rear fingerprint sensor and its model name, Z981, which can be found under the rear case.

133回答 すべてを表示

What's causing my charger not to keep connected

When I plug the charger in I have to wiggle it for it to start charging. Sometimes it flickers on and off and sometimes it doesn't charge . Is it the cord is it the phones connection port? How do I check it, how can I fix it?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
1件のコメント

Thank you everyone! It was the cord

さんによる

コメントを追加

3件の回答

ベストアンサー

Hi @gili4 ,

Use a strong light and a magnifying glass to check that the micro USB charging port enclosure hasn't got lint or dust trapped in it.

If it has, DO NOT use a metal probe to remove the debris. Use a vacuum cleaner to try and suck it out. If it refuses to dislodge, try gently using a wooden toothpick.

Also check that the 5 pins in the port are all there, are of the same length and are straight and parallel with each other.

You can also check if the USB port "feels" lose at all, indicating that it may be partially disconnected from the systemboard. To do this, plug the cable into the phone only. Then hold the phone firmly and gently (stress very gently)try to move the plug of the cable either sideways or up and down in the port enclosure and see if you can detect any movement at all in the port.

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

TY I really appreciate your help.

さんによる

コメントを追加

It is most likely the cord. How long have you had this cord for? Is it the original cord that came with the phone?

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Phone's 6 months old. Wasn't connecting in car. Home was fine. Now neither work well

さんによる

コメントを追加

It’s definitely the chord when you start putting it in your pocket and moving it around a lot the chord starts to fray on the inside and it looses connection. Time to buy a new chord.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Gregory S Cordy さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 999