メインコンテンツにスキップ

2017年11月4日に発売。モデル番号はA1865, A1901です。GSMか CDMA / 64か256 GB/カラーはシルバーかスペースグレー

937回答 すべてを表示

If you crack the back on the iPhone x is it still waterproof?

I recently cracked my Iphone x on the back, but most of the cracks appear to be internal, meaning you can't feel them. If I were to drop my iphone in water, would it be waterproof because it is just the back that is cracked?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2

コメント:

Hey Trevor. I happen to be in the exact same situation . I just wanted to ask you what did you do eventually? Got it repaired or no??

さんによる

when I had my iPhone 10's back cracked it fell in to water and it broke shortly after so from what I know yes it will get rid of the water proof if even the back is cracked

さんによる

コメントを追加

10件の回答

最も参考になった回答

I would hazard to guess that it would most likely not be anymore.

You can take a look at the iPhone X Teardown, specifically Step 22. There are some good images as to why it would most likely not be anymore.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

Essentially no. This is the same for any other device that has a IPX water resistance rating. If there happens to be any "breach in the security" per say. The registered waster resistance rating is thereby removed. Even if you were to get a new screen there is a chance that it may never be entirely water resistant again. Sorry to say.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

More importantly you should know, that iPhone X is not “waterproof” but “water-resistant”.

Quoting from Apple website “Splash, water, and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear. “ So I’d say that whatever you do, do not drop your expensive phone in water, cracked back or not.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

There are a few factors that make it almost impossible to make the repair as watertight as it was. This also includes Apple's own repairs!

First the surfaces where the glass is attached need to be perfectly clean and not have any dings or warpage. The adhesive needs to be applied just so and then the glass surface the adhesive attaches to needs to be spotless. Even then you need a press to hold the glass to the frame so the pressure is even and held for a good 10 hours so the bonding of the adhesive is complete.

If you look at the watch makers or companies that make underwater housings they use a very different method of sealing! They use O rings so the seal is compressive. My cheap Seiko watch has been down over 60 ft SCUBA diving I wouldn't dare do that with my Apple Watch or iPhone new or serviced!

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Yes it will be waterproof still I tried it

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Yes. And now the screen won’t touch and it’s doing what it want to do.

このアンサーは役に立ちましたか?

スコア 0

コメント:

The back of my iPhone XS is cracked. My toddler threw it in my pool and it was fine. I got it out right away and was worried because of the cracks. But no water got in. Thankfully!! Wish they just had metal backs like they used too.

さんによる

コメントを追加

Mate don’t worry, sank 12 coronas, went skinny dipping and my the phone was calm

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

Yes,mines just dropped in water up to shin height,and it’s still working as I type!!!!

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

Probably not. The water will go in and make all the stuff wet like the motherboard and battery, my brother had an Apple watch and it had a small crack in the corner of the screen he went into the shower with it and it broke. You’re most likely gonna need to keep it away from water, just incase.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

Yeah when you chance the back glass is still waterproof

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Trevor さん、ありがとうございました!
統計データを表示:

過去 24時間: 16

過去 7 日: 75

過去 30 日: 327

今までの合計 42,752