メインコンテンツにスキップ

2011年後期モデル番号A1278 / 2.4 GHz i5 or 2.8 GHz i7 プロセッサー

591回答 すべてを表示

System doesn't recognize Samsung EVO SSD

I want to install a new drive in my MacBook Pro. I chose the Samsung EVO 250 GB.

To install I followed these steps:

  • Connecting the SSD with a SATA cable to my Mac. Using disk utility, erase the SSD. Clicked on GUID partition and MacOS extended (journaled).
  • With carbon copy cloner I cloned my old hard drive to the SSD, including the reboot option. I then installed the new SSD in my system,

But when I turn it on it only shows the white screen of death. When I start up with cmd+r and go to disk utility, the SSD does not show up.

What did i do wrong? I hope someone can help me out!

Thanks in advance.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

I would recommend you stick with Sierra. High Sierra has some issues still with SATA based SSD's with the newer APFS High Sierra automatically upgrades the drive to.

さんによる

コメントを追加

3件の回答

ベストアンサー

reformat the drive & install the system. The do not clone (destroys the repair partition). Use migration Assistant to move your user and apps.

このアンサーは役に立ちましたか?

スコア 2

3 件のコメント:

@mayer - Likely needs a new HD SATA cable too!

さんによる

@danj absolutely , and the 2012 model cable.

さんによる

Here's the details, follow this IFIXIT guide: MacBook Pro 13" Unibody Late 2011のハードドライブケーブルの交換 and this is the better cable: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable. I also recommend placing some electrical tape on the uppercase where the cable rests as the aluminum abrades the cable

さんによる

コメントを追加

@piera , I can almost guarantee that you either have a damaged SATA cable, or a defective Samsung SSD Drive.

I am running this config with High Sierra fine.

Block Image

Block Image

Also, there is no reason to use CCC to clone.

The built in migration wizard on a clean install will take care of anything.

The only thing you may need to do is re-enter installation keys for applications like MS Office.

このアンサーは役に立ちましたか?

スコア 1

3 件のコメント:

I would still stick with the older Sierra OS @avanteguarde I'm still running the beta releases and they are still having issues with queueing with the Finder process. Don't get wrong I do think the new file system is better! But not at the risk of not being able to save a file without needing to wait a good 30 sec. or more depending on what else I have running concurrently. Mac OS Extended (Journaled) doesn't have this issue.

さんによる

@danj I am in no way disputing the OS. Just saying the drive works great! :-)

さんによる

@avanteguarde - And I'm using a Samsung 850 EVO in my system too! ;-} Great Drive!

さんによる

コメントを追加

I am also running the 500gb Samsung Evo SSD - after installing I had an identical issue. It was indeed the SATA cable. -- Went ahead and installed the new SATA cable, and the system works very well - and significantly better than it did with the old crappy HDD.

Also, I am running High Sierra and everything is fully operational.

Best of luck in fixing your issue brother!

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Piera さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 7

今までの合計 4,906