修理を始めるには コミュニティ ストア

2014年9月19日に発売されました。この5.5インチサイズのスクリーンをもつiPhoneは、iPhone6の拡大サイズ版です。

1525回答 すべてを表示

オプション

Why does my loudspeaker not work after lightning port replacement?

Hey guys, so I ordered a lightning port replacement as my phone was in dire need of a new one due to the charging being really dodgy. So just now after replacing it, putting it all back together, the phone powers on (hooray!). However I'm surprised by the fact that my loudspeaker does not work! It creates like a short static noise like when you turn a speaker on. Can anyone point me in the direction of an answer please? Thanks :)

EDIT:

The loudspeaker had been working perfectly before the lightning connector replacement. Also just went play a video on facebook and the whole phone restarted!

EDIT 2:

My earpiece speaker by the frontfacing camera no longer works either! Completely confused

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
1件のコメント

I had the same problem, after lots of trouble shooting i discovered the pins on the lightning port connector that connects to the logic board were flattened and bent on one end.

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Thanks for your comment mate, I managed to solve my issue. I luckily held onto my old speaker (only replaced as it sounded a bit distorted) and cleaned the contacts on the board and the speaker with alcohol and then put it back together and it works like a charm!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加
最も参考になった回答

オプション

Hey. First of all check the old charing port if it got dust and dirt in the charing port. A needle usually works fine.

Test a hard reset, turn it off. Hold power button and home button same time for about 20-60sec, when you see the Apple logo let go.

If that dosent help i would check so the speaker is set down good, the upper part of the media speaker maybe isent set down good.

I hope it helps

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

回答を追加する

Brandon Frost さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 13

今までの合計 2,554