修理を始めるには コミュニティ ストア

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

オプション

Ear speaker low and trebley. Cleaned and Changed speaker, still same!

I havent posted in a year or so because i left the industry, but I've fixed 1000's of iphones.

My wife's ear speaker is very low and shrill. So I opened it up, and replaced speaker. I also made sure mesh was clean. Still the same. Then I took the new speaker and tried it in a different LCD assembly, but on the same phone, and it worked fine.

I went back to the original assembly and rechecked the mesh and hole; clear. This can only mean its something in one of the flexes, right? The other assembly, of course, gives me the fingerprint warning(That it won't work) but she never uses it anyway, but its just perplexing this kind of crap still happens with iphones. Any ideas?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

If it works fine in another assembly, then yes. You most likely just need to order a new camera flex assembly. but if you don't want to lose the fingerprint function, then just use the original home button in the other assembly..if you are, then also change the backplate as well where the long Home button flex is attached to.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

2 件のコメント:

I just transfered the other to my wifes..thanx anyway...

さんによる

Okay, sounds as if you diagnosed it right the first time:) Best of luck!

さんによる

コメントを追加

オプション

Yup, It was the Ear Speaker, Prox. Loc, FF cam flex. I took the old one off the other assembly, reinstalled on my wifes, and it works. Ugh, I do not miss this.

Anyone trying this that hasnt before, make sure you heat the front side of the glass just below the FF cam and prox sensor(This will loosen the glue and make it easier to remove), and carefully remove the old with a thin smudger. when installing the new one, make sure everything is perfectly aligned and the cover fits on perfectly. There are no shortcuts and if its not exactly right, and the piece is askew, you can damage your LCD assembly when you put it all back together.

Hope this helps someone.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

回答を追加する

Peakcelln さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 268