メインコンテンツにスキップ

2011年初期のモデル。モデル番号はA1278 / 2.3 GHz i5 or 2.7 GHz i7 プロセッサー。

778回答 すべてを表示

820-2879 LCD connector shorted now won't power up

Hi, I have an 820-2879 where the LCD connector locking arm shorted out the connector.

I have a green light on charger but no power up. I am trying to learn board repairs so thought a good one to start on.

PP3v42_G3H is at 3.48v but

I'm finding PPBus_G3h on the output of F7040 to be going from 12.8 - 2.8 pause then starts again at 12-8volts and goes down.

I am trying to learn so presume U7000 is what helps produces PPBus_g3h is that correct?

Q7030 has the same irregular voltage on pin 4.

Am I looking down the right line, can I have some help/advice please on where to go next?

Could it also maybe be something trying to turn on then can't hence why it goes back through the voltage cycle.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

2 件のコメント:

@mccltd this is of course after you changed the connector? Best person to let you know would be either @reecee or @tcrs_circuit

さんによる

Resistance between pins 17/18 and 27/28 of U7000?

さんによる

コメントを追加

1 件の回答

You could have shorted something out.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

dave さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 81