I have both a 20" and 27" iMac. I want to swap the hard drives and give the other to my daughter. the 20" has a 2tb hd that is partitioned using 1tb for mac and 1 for windows. I don't want to lose my data and wonder if I could just take out the hd and swap it. Any thoughts?
評価: 1千
7
2
2
May be here is the solution, please see it....
このアンサーは役に立ちましたか？
@raichel121 - There's a bit more involved here than what your link implies. Without all of the info we're shooting in the dark here.
評価: 479千
35
329
970
So far both systems have SATA II (3.0 Gb/s) interfaces so you won't see any speed difference. The 2010 model uses a custom thermal sensor cable for the systems SMC services. Unlike the 2007 model. Here's the IFIXIT guides for reference:
Review Step10 in the iMac Intel 27" EMC 2390 Hard Drive Replacement guide. Without knowing your exact drive we can't aim you to the custom cable you need as each supplier of HD's have a different cable your other option is getting this OWC adapter: OWC In-line Digital Thermal Sensor for iMac 2009-2010 Hard Drive Upgrade
The last issue here is the OS your drive has on it needs to be one that the 27" model supported older OS's may not allow the system to boot. You'll want to create an OS installer drive following this guide: How to create a bootable macOS Sierra installer drive. So you can re-install the best OS for your system. I do recommend you boost your systems memory to 8 GB or more.
ガイド
難易度：
中レベル
—
1 hour
ガイド
難易度：
中レベル
—
40 minutes - 2 hours
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 55
Can you give us the details of the 20" model and the make and model of the HD you have installed.
Dan さんによる
Both are iMacs. The 20" is mid 2007, the 27" is mid 2010.
Robert C Rivera さんによる
OK here's the specs for your systems:
iMac 20" 2.4 GHz Core 2 Duo (Mid 2007)
iMac 27" 2.93 GHz i7 (Mid 2010)
We still need your hard drive details.
Dan さんによる