修理を始めるには コミュニティ ストア

2013年9月10日に発表されたApple iPhone 5sの修理情報とガイドです。モデル A1533、A1453、A1457、A1528、A1530、A1518。

3530回答 すべてを表示

オプション

Replaced battery but now my touch screen is acting up

Hey Guys,

Soooo I replaced the battery of my iPhone 5S.

That is a big game changer (batterywise).

But the only problem is now that my touch screen is acting up. Is displaying correctly and it mainly works but not it doesn't respond sometimes. It just seem to ignore my touch. Sometimes i have to try a few times to close an application by swiping it. It doesn't do anything other times.

The digitizer was sorta loose on the topright corner when I reassembled.

But a little nudge and I thought that was okay again.

Do I need a new screen entirely?

I'm pretty sure everything was reconnected properly when I reassembled.

Is there another explanation? Rebooting didn't fix anything.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

3件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Since you have removed the screen you might have damaged the digitiser flex cable or possibly you might have a lose cable. Take screen off and check no cables are lose and firmly in place. If problem continues then you have damaged the digitiser flex. New screen will be needed to solve problem.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

When you changed the battery did you take off the screen?

check to see that all the cables are connected properly. I sometimes have problems linked to the cables not being connected properly.

If you did not take off the screen you might have pulled one or multiple of the cables, which then means you probably have to change the screen as well if I'm not mistaken.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

I did indeed take of the screen. As per ifixit instructions. Could a impartial loose cable explain a screen working in image but only 60% of the time the touch tech side of it?

Anyway I'll reopen it but i'm pretty convinced that all kabels were connected properly though. I'll try that to be sure.

さんによる

コメントを追加

オプション

Hey Guys,

So a little update. I opened it back up.

Still two tiny issues. When you have to reattach that metal plate holding the wires in place of the screen I could only screw 3 out of 4 screws back in place. The topright one it doesn't screw in. It seems like that thing where the screws should go isn't there anymore?

Also the first two screws. The ones next to the jack. Only one really screws back in nicely. The other is ± 1 mm sticking out.

That being said it's all back together AND i do believe its working better.

Maybe it was a loose cable maybe. Here's hoping it stays better. But thank you for encouraging me to open it back up!!

I bought a spare screen anyway. Just to be on the safe side.

Thnx again!!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

The screws are all different lengths, so make sure they go back in there exact spot otherwise you might damage something.

さんによる

コメントを追加

回答を追加する

Stijn さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 132