メインコンテンツにスキップ

New Nitendo 3DS XLは2014年10月11日に発売されたNintendo 3DS LLの後継モデルとして、日本国内で発売されました。北米では、2015年2月に発売されました。

379回答 すべてを表示

Why my R4 doesn't start? (White Screen) System 11.6

Hello, I have taken my new R4 Just yesterday, I already put the update firmware (11.5) from the official site... the only thing is that it dose not work!! I want to know if i need the official site to release the update version (the 11.6) or if there are other method to make it work.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 4
3 件のコメント

Hi!

Are you sure the card works? Don't you have to set your 3DS system to auto-launch any game-card based software upon boot to launch the CFW? This is how that works on the DS Lite at least, on my friends R4i Gold which I set up...

さんによる

I don't think this is gonna work, the problem is that, when I press the icon "bomberman Land" (the R4 icon) the only thing that it's show me it's a white screen.

さんによる

I think you need to install the firmware on to the card. You would have to format your micro SD card and download the firmware and copy it to the micro SD. A good source for firmware is https://www.r43ds.org/pages/R4-3DS-Firmw... as that page has firmware for a lot of the r4 cards. Check their photos and download the correct firmware

さんによる

コメントを追加

3件の回答

ベストアンサー

Ahm, emh...... never mind, i found out that I need to format the microSD card with an SD card (SD Card Formatter) than it's start working. Thanks Anyway

このアンサーは役に立ちましたか?

スコア 2

4 件のコメント:

after hours, THIS WORKS, THANKS SO MUCH !!

さんによる

Work for me too. I use this program to format micro sd card:

https://www.sdcard.org/downloads/formatt...

さんによる

I have a question.... Are you god ? Because it works !!!!!!!!!!!!! OMG thanksss

さんによる

After using ntrboot successfully and then afterwards trying to flash my backup of my R4 Gold card, I eventually got it by using the 'R4 SDHC family' option in ntr boot to get the card to read again. But it was still booting to a white screen after putting my backup files back on the sd card for the R4. After doing this step and using these specific formatters, my R4 card is now finally back up and running again! Thank you so much for these suggestions!

さんによる

コメントを追加

I have updated the latest firmware but still get a white screen

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Format your micro sd card with this program:

https://www.sdcard.org/downloads/formatt...

さんによる

コメントを追加

Help please I have a similar issue except all I did was buy a micro sd to sd adapter and try to add some roms then I took the roms off and it still won't boot just a white screen

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Format your micro sd card with this program:

https://www.sdcard.org/downloads/formatt...

さんによる

コメントを追加

回答を追加する

RuberFF さん、ありがとうございました!
統計データ:

過去 24時間: 3

過去 7 日: 22

過去 30 日: 80

今までの合計 33,046