メインコンテンツにスキップ

The Kenmore Elite HE3 is a washing machine by Kenmore.

668回答 すべてを表示

clear water in the drum

Same. After a load is finished, i take out the clothes and the drum is bone dry. Then hours later (eg the next morning) there is clear water in the drum. It started happening only after delicate loads, but now it's happening on regular loads too.

Any help would be appreciated!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

I changed this to its own question as it's different than what you attached it to. Your problem is caused by one of these two issues:

Cause 1

Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.

Cause 2

Low Water Pressure from House Supply

The home water pressure might be too low. The water inlet valve requires at least 20 psi to function properly. Check the water pressure to the valve to determine if it is sufficient.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

mark miller さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 477