Appleの iPhone 5sは2013年9月10日に発表されました。このデバイスの修理は全モデルの修理と類似しています。そしてスクリュードライバー、こじ開けツールが必要です。GSM か CDMA、16か32、64GBがあり、色はシルバー、ゴールド、スプレーグレイが選べます。

3831の回答 すべて表示

Both cameras are black and flashlight doesn't work

Hi everyone,

I recently replaced my iPhone 5s battery. Everything worked well except for both cameras and flashlight. Camera app is not taking pictures and the screen is always black. The flashlight doesn't light at all, the button comes unchecked as soon as I push it. I reopened the case and checked all the connectors, did a complete reset, tried to use the old battery but nothing changed. I can't explain why this problem could happen on both cameras, nothing seems to be loose or broken. Maybe there is a problem on the logic board? Thanks

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 1

コメント:

if you are having problem on iphone camera and its not working then its very irritating if you want to solve your problem regarding to iphone camera then solve this reading this article

https://iphonenotworking.com/iphone-came...

による

Hello all, my problem was resolved simply by deleting a lot of photos and videos! As soon as I did that, both my camera and flashlight began working again.

による

コメントを追加

Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

当社のショップを閲覧する

1回答

選択されたソリューション

There are a few things that can cause this issue. I would first try a hard reset...holding the power and home button for 10 seconds or so. If that doesnt work, try to Go to "Settings" > "General" > "Reset" > "Reset All Settings". This won't delete any files or apps on your iPhone but erase your preferred settings on the apps. After the resetting, open the camera app and see if it works okay now.

If not: Go to "Settings" > "General" > "Reset" and choose "Erase All Content and Settings". This will delete all files and third-party apps on your iPhone so it should be the last resort. To not lose any data, back up your iPhone before factory reset (If important photos are lost after factory reset, recover iPhone/iPad photos with iCloud/iTunes backup).

If none of those work, check the Filters near the Flex connection on the logic board to see if they have continuity or have been damaged or knocked off the board.

Before doing the factory reset, I would definitely check the filters first but never hurts to have a full backup of your phone either way.

この回答は役に立ちましたか?

スコア 4

コメント:

I already tried every possibile reset. I will check the filters like you said, do you have any image of the location of camera filters? Thanks

による

Hmmm...

The only common denominator between those three is the CPU. Let's put that aside for now as it seems unlikely to be the problem.

I would check the voltage on the PP2V85_CAM_AVDD rail. It drives both cameras and the RCAM also sends an enable signal to the Strobe circuit (RCAM_TO_LEDDRV_STROBE_EN). In theory, if 2V85 is bad, then both cameras stop working and the enable signal to the Flash is missing, hence no flashlight.

による

hostlikepro - That does NOT work

による

コメントを追加

回答を追加する

Francesco さん、ありがとうございました!
統計データを表示:

過去 24時間: 65

過去 7 日: 492

過去 30 日: 2,522

今までの合計 36,664