メインコンテンツにスキップ

1.83、2.0、2.1、 2.16、2.2、または2.4 GHzのいずれかのCore 2 Duoプロセッサーを搭載したModel A1181

1203回答 すべてを表示

Won't power on - at all. What to do/replace?

School computer for student use was brought to me with complaint: running on battery-only, unexpectedly powered down. I charged with known-good outlet and power adapter for over 24 hrs. At first the magsafe light would alternate green-orange, later only a VERY dim green glow. Pressing the power button has no noticeable effect - no noise or light. I've reset the SMC numerous times; swapped the RAM around; tried with and without battery.

Condition: magsafe port is clean; some damage to the case - probably voiding Applecare - topcase is raised somewhat near IR receiver, bottom case has hairline crack near join of topcase to left of trackpad (damage appears old); power button is SLIGHTLY depressed (but has satisfying click feel when pressed).

From reading here, I'm guessing it may be the mag safe board or topcase - but I don't know which is more likely, or maybe something else.

Suggestions?

BTW, this site is awesome!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
1件のコメント

I replaced the MagSafe board and it's now working! Thank you.

さんによる

コメントを追加

2件の回答

ベストアンサー

I'd go for a new MagSafe Board, as it doesn't work, even when plugged in and battery removed.

See here:

MacBook MagSafe DC-In Board

Cheers,

deSteini

MacBook MagSafe DC-In Boardの画像

製品

MacBook MagSafe DC-In Board

$19.99

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Thank you. I've ordered the DC-In board.

さんによる

コメントを追加

Swap in a new battery and try that, if not, I'd think the mag safe board.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

David A さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 1,575