メインコンテンツにスキップ

2012年半ばモデル、A1278/2.5 GHz i5または2.9 GHz i7プロセッサー。

1623回答 すべてを表示

Replaced Hard Drive Cable and I am still unable to start MacBook Pro?

I am unable to start my 2010 Macbook Pro. I brought it to the Apple Genius bar and they assured me that the Hard Drive Cable had gone bad so I replaced the cable and I am still facing the flashing question mark of doom when trying to boot my Macbook Pro. Has anyone else encountered this issue?

I have troubleshooted utilizing the following apple forum to no avail: https://support.apple.com/en-us/HT204323

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

They should have repaired that cable for free on this model.

さんによる

コメントを追加

2件の回答

最も参考になった回答

Either just the hard drive is bad, both are bad or the cable you bought is faulty. I often see these where both the cable and drive go bad.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

Sadly the recovery partitions copy of Disk Utility can't fix the boot sectors as the files on the physical disk can't be open in this case a second partition.

You'll need to find a friend with a Mac that you can connect your system to using Target Disk Mode to your friends system. That way you can run Disk Utility from your friends system.

If you don't have access to a second Mac you could also create an OS install drive so you can use it to boot your system and access Disk Utility from it and then re-install the OS from it.

Using these two methods the drive is not being held open so the lower levels of the disk can be accessed.

Even still! It might be the disk is damaged beyond hope here. So before you try any repairs see if you can salvage any important files before you scrub the drive.

If you need to replace your drive I would recommend going with a SSHD or SSD drive. Both offer better performance than a straight HDD.

Here's more info:

このアンサーは役に立ちましたか?

スコア 2

8 件のコメント:

Straight internet install?

さんによる

@mayer - That works too, its just so sloowww for most!

If you had a network sniffer and monitored the amount of network activity, Internet recovery uses much more than if you downloaded the installer and then built the installer thumb drive afterwards.

さんによる

Guess I have gotten use to my 220Mbps.

さんによる

@mayer - Here in Boston at home the standard is 30-D/6-U MBps. You need to pay quite a lot to get the better 90/20. Business service offers the better bidirectional 100 or 200 and you need to be in physically in a business zone to get that.

BTW we only had one provider until last year and they are still wiring the different parts of the city. Where I live will be the last phase (of course). Then we'll have some competitive options!

さんによる

@mayer - Here's a good site on what the 'rest of us' get, I'm so jealous ;-} SpeedTest - Reports

さんによる

3件以上のコメントを表示

コメントを追加

回答を追加する

Alex Arnott さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 2

今までの合計 670