修理を始めるには コミュニティ ストア

MacBook Proの13インチディスプレイ搭載モデルの修理情報・ガイドです。

9739回答 すべてを表示

オプション

Keyboard Blacklight doesn't work after Ram upgrade

Yesterday I personally upgraded the Ram of my macbook pro, before closing the case I cleaned some dust from the fan and around it. I closed it and everything seemed to be ok, but when it became evening I noticed the backlight won't light up.

After some research I found a Macbook pro teardown, and I was able to see what cable connects the logicboard to the keyboard. It seemed fine, even disconnected the cable and connected it again. Didnt work.

So my question is, should I keep looking at the logicboard or is somehow my keyboard unit broken?

Thanks in advance,

Mike

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア -1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

It's got to be in your keyboard cable or logic board connectors. To make sure just replace the original RAM.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

Thanks for your response, will try to put back the old ram and check the cables again ;)

さんによる

コメントを追加

オプション

If your keyboard works, but the keyboard backlight does not, most likely you need to reconnected the keyboard backlight ribbon. You may have knocked it loose while upgrading ram. Look to the logic board removal guides on here, the keyboard backlight connector is very delicate and has a flip up mechanism that you need to flip up before removing the ribbon. Then very carefully reinsert the ribbon. Insert it very far in. I usually use the back of a pair of tweezers/ or a spudger to get it way in there then flip back down the connector.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

回答を追加する

mike さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,497