メインコンテンツにスキップ

2016年9月16日に発売。モデル番号は1660, 1778で GSM かCDMA があり。/ 32、128、 256 GB / 色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラック

2261回答 すべてを表示

iPhone 7 freezing after screen repair

Hi, i work at a phone repair shop and i constantly have iPhone 7s that come back with a problem where they will be using the device and randomly the screen will freeze and they will have to shut it off and turn it back on. It only starts happing after the repair. was curious if this is a known problem and if it could be a repair oversight or faulty parts?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 4
コメントを追加

7件の回答

最も参考になった回答

I have brought this to the attention of many parts suppliers and this link will give you everything you need to know. This is why apple has a calibration machine, The iPhone 7 through 8 plus will experience this due to 4 separate manufactures of screens, LG, Toshiba, Sharp, and JDI. If your screen does not match that it will need to be calibrated with the machine or it will not communicate properly. Best solution is to check the first 3 characters on the screen and try and find one that matches the original.

'''https://webuylcds.co.uk/2018/05/15/to...

このアンサーは役に立ちましたか?

スコア 3

1件のコメント:

Or use eprom reprogrammer for 50$

さんによる

コメントを追加

Restart your iPhone 7(press and hold power button and volume down untill you see the Apple logo),if this still not work, backup your iPhone and do a factory reset.

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

It worked. Thank you.

さんによる

コメントを追加

Sounds like a screen quality issue. Have you tried different screens?

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

i also work at repair shop and having same issue , dont know what is it yet ................

annoying thing is customer are having problems because of my service :(

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

If each time it's the same thing, it's due to bad quality LCD. Buy a new lot of LCD.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

My screen is on, but it doesn't respond when you tap, slide, or try other gestures. Wont even let me slide the power button off nor let me enter my passcode. Could i just need a whole new screen?

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

You need new screen

さんによる

コメントを追加

Please don’t read comments from others… EPROM reprogramming needed. This is the only real and working solution. Costs 50$


https://www.youtube.com/watch?v=Uv4BDpWf...

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Arima さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 3,802