メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

2014年10月16日に発売された iPad Air 2は初代 iPad Airの継続版でより薄くなったスタイルです。

411回答 すべてを表示

Which kind of digitizer connector on the LCD/Digitizer set

I have an unusal fix to perform actually.

It's on an Ipad Air 2, but in fact it's not located on the mainboard but... on an LCD/Digitizer set. The set is in good condition but on the digitizer ribon the two connectors (one 42 pin & one 34 pin) need to be replaced as some pin are spoiled.

I can change them but the only issue is that I can't find these connectors to buy.

Can somebody tell me if it is possible to find them somewhere?

They look like this : http://www.mobilemates.com/M-SPiP5-1053_...

Thanks

I

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

選択されたソリューション

This is gonna be pretty difficult to find. Your best bet, is to find another repair shop, that has one with a broken LCD. Then you could source the parts you need. Pretty uncommon for folks to repair the connector socket cables

このアンサーは役に立ちましたか?

スコア 4

コメント:

The OP would have to spend some time on sites like Digikey and look for one that has the same physical specifications. Hirose is another common manufacturer used for these types of connections.

さんによる

Thanks a lot Minho for this usefull info. I just bookmarked the site :)

さんによる

iMedic : yes pretty uncommon I agree. But admit that when it is located on a set that usualy cost 120/130 $ pce this solution is not an option.

さんによる

This is why I raid the graveyard

さんによる

コメントを追加

回答を追加する

Patrice さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 63