Back camera not working, then front camera not working: Screen replace

Question

iPhone 6

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答すべてを表示

Eddie Geddy @eddiegod

評価: 13

2

1

投稿日: 2017年5月6日

オプション

Back camera not working, then front camera not working: Screen replace

Hi,

Before I start i would like to add that this is a different problem and have not been described from the threads ive read.

After my screen replacement on iPhone 6 I noticed that the back camera did not work, (it said it was too hot) I opened it and the back camera cable was not fully attached, I fixed it and the back camera started working, then the front camera did not work, what could have occured this?

Everything worked at first, and the front camera did work during the time the back camera was not working

Please help

Thanks in advance!

/Eddie

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

1件のコメント

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard.

Eddie Geddy さんによる2017年5月6日

コメントを追加

1 件の回答

ベストアンサー

Minho @refectio

評価: 221.4千

15

289

806

投稿日: 2017年5月6日

オプション

I would go back and double check (see step 15) the connector for the front camera. It may have become partially dislodged when you fixed the back camera.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

3 件のコメント:

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard.

Eddie Geddy さんによる2017年5月6日

Then the obvious thing to try is a new front camera. However if that doesn't work, then yes, you probably have an issue on the logic board. When the back camera created excess heat, that is usually a short condition and it may have damaged one of the voltage rails. There are three voltage rails for each camera (one of them is shared so that one is probably fine).

Minho さんによる2017年5月6日

Yes, I will try changing the camera but the weird thing is that, I dont understand what happened the second i put the back camera in, the front broke.

Eddie Geddy さんによる2017年5月6日

コメントを追加

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard. — Eddie Geddy
Then the obvious thing to try is a new front camera. However if that doesn't work, then yes, you probably have an issue on the logic board. When the back camera created excess heat, that is usually a short condition and it may have damaged one of the voltage rails. There are three voltage rails for each camera (one of them is shared so that one is probably fine). — Minho
Yes, I will try changing the camera but the weird thing is that, I dont understand what happened the second i put the back camera in, the front broke. — Eddie Geddy

iPhone 6

Back camera not working, then front camera not working: Screen replace

1 件の回答

回答を追加する