メインコンテンツにスキップ

Model番号 A1225 / Mid 2007とEarly 2008 / 2.4, 2.8もしくは3.06 GHz Core 2 Duoプロセッサ

433回答 すべてを表示

Won't complete start up process?

My iMac start showing black squares on its screen and then had distorted pixels on the display. It eventually got to the point where it will attempt to start up (bongs, shows apple icon and progress bar, but then goes to restarting in a continuous cycle. The start up screen is sharp and clear; it just can't complete start up.

I opened the computer up to see what the diagnostic LED's said. The four LED's are all lit up when the computer is plugged in and attempting to start up. LED's 3 and 4 go off when the computer restarts. I first thought the video card was bad but LED 3 is on, indicating that the computer and video card are working properly. Any ideas on what might be wrong?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

The problem was caused by a defective/corrupted hard drive. However, after installing a new hard drive, the original problem is gone, but I am unable to get the computer to boot from another disc or device in order to install the operating system (mac OS El Capitan).

I tried doing it using a time machine back up drive; a formatted USB flash drive with macOS El Capitan installer on it; and by trying to connect to the internet to download the OS. Nothing has succeeded. Ideas?

さんによる

コメントを追加

1 件の回答

最も参考になった回答

Unplug the LCD cable and plug it into a moniter. If it has the same screen issues, then it might be the GPU

このアンサーは役に立ちましたか?

スコア 2

6 件のコメント:

I completely agree. The main problem here is that the OP has diagnosed the problem and probably won't until he becomes totally frustrated.

さんによる

Yeah sadly this is most likely going to happen.. It's a classic case of bad GPU. If it was caused by a bad hard drive OS would install fine and boot up.

さんによる

OK, but why is the 3rd diagnostic LED lit if the video card is bad? I don't have an external monitor that I can connect to the computer.

さんによる

I can't seem to find instructions for replacing the GPU on the iFixit site?

さんによる

Oh my bad. I didn't know that you replaced the HD

さんによる

1以上のコメントを表示

コメントを追加

回答を追加する

Cal Wurpts さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 121