メインコンテンツにスキップ

モデル番号A1502/2.6GHz(Turbo Boost使用時最大3.1GHz)もしくは2.8GHzTurbo Boost使用時最大3.3GHz)デュアルコアIntel Core i7、4MB共有L3キャッシュに変更可能

493回答 すべてを表示

Screen lights up a little bit but no image, works on external monitor.

Macbook pro 13" mid 2014 works on external monitor but nothing on the retina display. The edges of the screen show white light. It blinks when it boot. I checked the connector and cable, they seems to be fine. Any idea?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

ベストアンサー

Common issue on 13" Retinas, usually randomly happens or when it is knocked, and causes no picture or a black screen.

Reconnect the LCD cable logic board side first, since this usually resolves the issue (disconnect battery of course). If this doesn't work, reconnect it screen side, watch from 5:23 here https://www.youtube.com/watch?v=ZLNUjeUL...

If it is still not showing picture, try a new LCD cable. Check the screen board for liquid damage, and then the logic board if there is still no luck with this, but a reconnect should fix it.

このアンサーは役に立ちましたか?

スコア 3

1件のコメント:

Yeah reconnect both sides and does the trick.

さんによる

コメントを追加

I think it's not the connector on the logic board but the connector from the lcd. You can try to reconnected the lcd cable. It's under the black clutch.

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

Is there a tutorial for it? Correct me if I'm wrong, you can't replace that cable on Mid-2014 model.

さんによる

I think it's possible but no tutorial. It is not that hard , ones you removed the display assembly you can open the clutch by sliding

さんによる

コメントを追加

回答を追加する

SoloLay さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 473