メインコンテンツにスキップ

2012年11月2日に発売された第四世代のiPadです。16、32、64GBモデルがあります。モデル番号はA1458です。

218回答 すべてを表示

Replaced Wi-Fi antenna and still have grayed out Wi-Fi.

Hello! My Wi-Fi was grayed out on my iPad 4. After attempting network reset with no luck, I changed the antenna. My Wi-Fi and Bluetooth are still grayed out. Any idea how to repair this?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

2件の回答

ベストアンサー

The antenna cables will not solve any issues with Wi-Fi not turning on or greyed out that is the Wi-Fi ic that has gone bad and needs to be replaced.

このアンサーは役に立ちましたか?

スコア 1

3 件のコメント:

I've actually repaired several iPads with this issue by simply changing the Wi-Fi antenna. On occasion I've had to switch the Wi-Fi controller chip, but only on the iPad 2. Switching the chip in the 4 is not an option. Thank you for your response.

さんによる

In that case it is just luck or disassembling the device actually resets something. Replacing the wifi chip in ipad 4 is difficult however still possible.

さんによる

Do you have a link or any info on replacing the wifi chip in the 4?

さんによる

コメントを追加
最も参考になった回答

@kk29680 ,Karen, I am hoping these suggestion's at links below may help your solve your issue. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.imore.com/if-wi-fi-option-gra...

http://www.appledystopia.com/tech-tips/i...

このアンサーは役に立ちましたか?

スコア 2

3 件のコメント:

I tried the suggested in both links prior to posting the question. Any other ideas? Thanks for your response.

さんによる

KarenS, Just a thought since you want to change the chip anyway, what about just heating it up in case it may need reflowed for connection, I do not know what temps,etc. just a thought.

KarenS, Found this info. at the 1st link below, I myself do not have experience with this repair and the 2nd link is a video showing replacement of wifi chip.

If you can make sure your wifi chip is not working. You can bid an iPhone 4s wifi chip from any B2B site or try ebay. And use a heat gun to set the temperature to 370℃ put some flux on the chip then blow for 1-2mins ,you can remove the chip from the board ,after that clean your board with 99%alcohol ,put the new chip on then blow for less 1 min.

https://forums.macrumors.com/threads/how...

https://www.youtube.com/watch?v=H33GpWr7...

さんによる

Thanks for the info. I'll give this a try and let you know if it works.

さんによる

コメントを追加

回答を追加する

K.K 29680 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 6

今までの合計 8,118