Computer randomly shutting down following RAM and Sierra upgrade

Question

iMac Intel 21.5インチ EMC 2389

モデル番号A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3もしくは3.6 GHz Core i5プロセッサ

342回答すべてを表示

Aaron Peterson @redbird74

評価: 13

2

投稿日: 2017年2月23日

オプション

Computer randomly shutting down following RAM and Sierra upgrade

I am working on a family member's computer and recently updated it to Sierra and upgraded by swapping two 2 GB RAM modules for 4 GB modules (4 GB up to 12 GB total).

The plan is also to upgrade the HD or swap the CD drive for an SSD to make a Fusion drive. However, after the upgrade, I've been having shutdowns of the machine. It boots fine and loads Sierra. Then it will load a webpage or two and then shutdown. It has also shutdown when trying to copy files to it. I tried to copy the details of the error log, but the computer shut down after copying them and before I could post them.

Any ideas? Is it something with the HD and I should just swap it out? Is it something more fundamental like the motherboard? Any input is greatly appreciated.

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

1件のコメント

Your systems specs: iMac 21.5" 3.6 GHz i5 (Mid-2010)

Dan さんによる2017年2月23日

コメントを追加

2件の回答

Dan @danj 評価: 479.2千 Self employed contract worker 35 329 971 · Answer 1 · 2017-02-23T16:29:24-07:00

最も参考になった回答

Dan @danj

評価: 479.2千

Self employed contract worker

35

329

971

投稿日: 2017年2月23日

オプション

How about pulling the new RAM and just running the system with the original 4 GB is the system stable?

If the system is stable the memory you bought needs to be checked. If the system is still shutting down then there is a deeper problem. I don't see moving forward here with the upgrading of the HD or adding a SSD until you solve the stability issue.

See if you can run the built-in diagnostics. Does an error message pop up? Is the system shutting down while running diagnostics?

If you suspect the drive is failing see if you can connect this system to a second Mac using Target Disk Mode. If you can connect it up you can use the other Mac to diagnose the drive using Disk Utility.

Let us know what you find out then we can move forward on how to fix and what hardware you'll need for the HD upgrade or adding the SSD.

References:

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

2 件のコメント:

Thanks Dan, great advice. I'm going to give those steps a shot tomorrow when I have a chance to look at it.

Aaron Peterson さんによる2017年2月23日

Check the speed and type of the original RAM and see if what you installed is the same. You said you swapped the modules but this machine has 4 slots. Sounds like you added two 4s to the original two 2s, which would give you 12GB.

mayer さんによる2017年3月13日

コメントを追加