メインコンテンツにスキップ

2012年11月2日に発売されたiPadの第四世代です。Wi-Fi, CDMAもしくはGSM モデルがあり、16、32、64GBの容量オプションがあります。

393回答 すべてを表示

iPad stuck in recovery mode after LCD replacement

So after replacing the LCD and power/volume buttons on my iPad 4 my iPad will bootup but default to recovery mode. I have tried all the obvious solutions to fix the problem like the iTunes update route and power button/home button combination route with no success. The screen appears as normal and looks completely fine. I am wondering if anyone has had any similar issues. Could it be a screw I put in the wrong spot, or could I have damaged a small part on the board that I can get fixed? Either way I am hoping for a solution and I greatly appreciate any help. Thank you!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

Some context here: i do not want to restore it because it has too many priceless memories. this is not a recent problem, i did this repair 6 months ago but i am just now losing patience and searching for help. Please!!

さんによる

Have you tried doing a iTunes restore? Sometimes the iPad just needs to be restored if the update fails with error code -26 for example.

さんによる

コメントを追加

1 件の回答

You mentioned you replaced the power button and volume buttons. It could be that cable is being depressed and something is causing the device to enter recovery mode. Its a pain, but if you can get back into the device and re-seat those cable connections on the logic board that could solve the issue, verify the buttons click freely and aren't spongy at all before trying to replace them again.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Donny Cara さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 149