修理を始めるには コミュニティ ストア

特別なタスクをこなす農作業用や建築現場用の乗用車。これらは走行スピードが遅く、大規模な作業をこなします。

83回答 すべてを表示

オプション

8970 ford new holland won't start or move and cluster goes crazy

It will not start or move or working any of hydraulics the gauges go crazy we have changed the computers and I have checked all the grounds front to back and it cab and cleaned them and cleaned and charged battery but if I hold the fuel solenoid up and crank it it cranks up with no problem but the gauges still go crazy and still doesn't move or nothing we checked the voltage the fuel solenoid it read .75 when the battery was at 12 volts any help would be great and appreciated

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 2
3 件のコメント

Wish I had a wiring diagram for it to follow

さんによる

sorry this isnt an answer to your question . Having the exact same problem with an 8670 and wondered if you got your8970 fixed.thks

さんによる

We are having the same problem on a 8970! Any words of wisdom???

さんによる

コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Hi @chadquick16

You may have to spend $US20 but it may be worth it in the end if it saves a lot of time and trouble. There are other suppliers of the service manual online but this is the cheapest that I could find.

https://www.tradebit.com/filedetail.php/...

Hopefully this is of some help.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

オプション

Sounds a couple things; 1) like a battery with a problem I’ve seen a car with bad battery (though held a charge, evidently had bad cell) do this. The other culprit I’ve seen do this is a bad CDI or combination failing CDI & relay.

You likely have tried this, but if not, take out the CDI box and heat it up with a hot air gun until it’s almost to holt to hold then immediately plug it in while still hot and try starting.

Sounds frustrating, I wish you luck!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

回答を追加する

Chad さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 22

今までの合計 2,354