評価: 37
2
1
The center plastic circle that the blade and cup attaches to in order to begin spinning, broke off and I ordered a new part. That part needs to be threaded onto the centre motor piece, how is that done? That center nut and screw must undo correct?
この質問は役に立ちましたか？
評価: 101.2千
8
172
358
mahcyb , The video links below will show how to remove the plastic drive wheel on your Magic Bullet and replace it(take note the threads are back wards to most, turn right((clockwise)) to remove/loosen) and anti clock wise to tighten on re assembling new drive disc. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
https://www.youtube.com/watch?v=Nz0yykNk...
このアンサーは役に立ちましたか？
Excellent Instructions! Thank You!!
Yes but still cant get the screw of
The plastic piece broke off and left the screw that held it on it is that wont move I hace taken it apart and have accsess to main stem it fits on bbut it want move
If you have any access to a dremel and can put cut off black wheel on it. You can cut a slot for a large flat head or standard screw driver. Spray anything Pam, cooking what ever you have. Penatrating liquid is the best. I like (Free All) from Orileys Auto Parts. Remember to let it work for you first. And final I have heard that some of the screws are reverse thread.
過去 24時間: 1
過去 7 日: 13
過去 30 日: 40
今までの合計 14,503
