メインコンテンツにスキップ

Released April 2013, model numbers GT-N5100 (3G & Wifi), GT-N5110 (Wifi), and GT-N5120 (3G, 4G/LTE & Wifi)

76回答 すべてを表示

I broke the connector where the ribbon cable from the battery attaches

To whomever might be willing to help,

I noticed significant battery drain and purchased a new battery. I have 2 of these devices and have replaced the battery in the other with no problems.

When I detached the cable from the old battery I noticed a black piece from the device (where the battery connects to the pins) broke/chipped off.

After installing the new battery and plugging it in to charge the device turns on, flickers a few times and turn off.

If I put pressure in the general area of the connection in concern it will work fine. However,the second I let off the tablet flickers and/or turns off.

Any suggestions would be greatly appreciated. I'm not sure what the name of the connector is in order to search for a replacement part.

Thanks in advance for your time and help,

B.J.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

ベストアンサー

BJ, if connector is still connecting with a little pressure applied but the lock tab broke off, perhaps you could tape connector down and build up a few layers of tape/shim so when device is together the connector has pressure on it to retain connection. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

http://www.ebay.com.au/itm/Genuine-Samsu...

is the part you need it will require some soldering skills to install without damage.

Good luck

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

B J さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 11

今までの合計 1,641