修理を始めるには コミュニティ ストア

モデル番号A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 プロセッサ

330回答 すべてを表示

オプション

Replacing SATA HDD to SSD for my 27 inch iMac

Hello, people.

I am from India and I have a 27 inch iMac late 2012 EMC 2546.

I purchased Samsung SSD 850 Pro and I am looking to replace the internal SATA hard drive that came with the system. I approached the apple service guys and they said they will do it for a nominal cost but I have to provide them all the necessary components.

I have a few queries with regard to this.

1. Going through all the posts in the forum, I understood I need an 2.5 to 3.5 HDD adapter. I am confused in selecting one. Could someone please give me a few options?

2. If I am changing the hard drive, should I be getting thermal sensor cable? What is the use of it? I just read that for MacOS El Capitan and Sierra, you wouldn't need the sensor cable.

If I am missing something apart from these two, please guide me. Thanks in advance.

Regards.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Here's the guide for replacing it:

iMac Intel 27インチ EMC 2546ハードディスクドライブの交換

Here's what you need for the temperature sensor issue:

https://eshop.macsales.com/item/OWC/DIDI...

Here's the caddy you will need:

https://eshop.macsales.com/item/OWC/SSD2...

If you want to add an SSD flash drive here's how that's done:

https://eshop.macsales.com/item/OWC/SSDI...

Installation videos are on this page.

このアンサーは役に立ちましたか？

はい いいえ
スコア 5

5 件のコメント:

@mayer - The SSD vid you posted is for the PCIe blade drive not the SATA HD connection.

Here's the correct vid: iMac 27-Inch Late 2013 HD Install Video While its for a newer model its the same process and you're using a SSD vs HD.

さんによる

@danj I know, see the sentence before I gave the link

さんによる

@mayer - I think he wanted to swap out his current HD for a 2.5" SSD Vs digging deep into the system to put the blade SSD in.

さんによる

@danj just wanted to let him know there were options ;-)

さんによる

@mayer - No worries here, just keeping you honest ;-}

さんによる

コメントを追加

オプション

2. The sensor cable measures the temperature of the HDD. One fan in the Imac is only for cooling the HDD. If unplug the sensor the fan will spin at 100% (very annoying). Some SSD´s work with apple sensor some not. But you can also unplug the fan.

1. You can use any rack 3.5 to 2.5 for an iMac. They all fit.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

3 件のコメント:

How do I know if the SSD I have works with Apple sensor?

さんによる

I have no options for 3.5 to 2.5 racks in India. So I have to be specific in getting one. If you could give me some links, that would be helpful.

さんによる

Did you look at the second link I gave? You can probably make one out of a tin can and some tin snips and a drill. Or get an old 3.5" hard drive, gut it, drill some holes and make one.

さんによる

コメントを追加

回答を追加する

Fahad Mohammed さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 2,622