メインコンテンツにスキップ

2012年9月12日に発表されたApple社による6番目となる iPhone。このデバイスの修理方法は前モデルと類似しており、スクリュードライバーと開封工具が必要です。GSMかCDMA方式、16/32/64 GB。 本体色は黒と白。

2522回答 すべてを表示

Won't charge any battery but still powers on with a precharged battery

I have an iPhone 5 that I am not using any longer and was selling. Before I sold it I upgraded it to iOS 10, reset it and charged it up.

The lady that bought it from me told me that she could not get it to charge at all so I had her return it.

Sure enough, the phone would not recognize any charging cable.

I tried checking for lint in the charging port and found none. So, I put in a different battery that was already charged up. It started right up but still wouldn't charge.

I replaced the charging port and still not charging.

I'm at a loss now. Does anyone have a suggestion?

If it's logic board related, I do not feel capable of performing that level of repair but would like to know what to have someone check for me.

Thank you.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

2 件のコメント:

Probably logic board related. Most likely a cheap car charger or cheap charger was used that could have fried the U2 Tristar charging IC chip on the board. That in result would require that chip to be replaced (Board level).

さんによる

Thank you. I saw a few posts about the U2 IC and was wondering if that could be the cause. The other people were still able to charge the battery as long as it wasn't completely discharged. That's why I thought it might be something else. Thanks again. I'll have it checked out.

さんによる

コメントを追加

1 件の回答

can the iPhone be restored in itunes? if not working after clean reinstall, probably non original charger and burned U2..try IOS 9.3.5 to install..

このアンサーは役に立ちましたか?

スコア 0

4 件のコメント:

No, the phone will not connect to iTunes either. Thank you for your help. I will have the U2 IC replaced.

さんによる

can`t get into recovery or restore mode? tried hard reset?

さんによる

The phone works fine as long as I insert a pre-charged battery. It does not recognize the lightning cable so it will not charge or connect to iTunes.

さんによる

Is the lightning port clean an free of dust and dirt? tried another cable to connect to itunes? checked the area where the battery ic connected on the board for missing parts?

Before changing U2 I would try a new dock flex cable..is cheap..click it on the connector at the pcb/board to test..doesnt need to be installed at the case to test charging and itunes-connection..

さんによる

コメントを追加

回答を追加する

jprobichaux さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 62