メインコンテンツにスキップ

2014年9月19日に発売されたこの4.7インチ画面のiPhoneは、iPhone 6 Plusの小型バージョンモデルです。モデル番号はA1549、A1586、A1589で識別できます。

5198回答 すべてを表示

iPhone 6 not charging

Hello, I got an iPhone 6 which is working perfectly except 1 thing. It's not loading/charging the battery. The weird thing is everything looks and works fine. You can connect it via USB, it's getting recognized. It's even showing this little flash next to the little battery display when the cable is plugged in. And the "USB gong" also appears. But it's only holding the current percentage of power.

If anyone has some ideas what to do now I would appreciate so much, thank you.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

2件の回答

選択されたソリューション

What is USB gong?

If the low battery symbol is flashing (when the phone is not turned on), that mean the battery voltage is very low and needs to be charged more.

So you are saying that the power from the charging cable is not going to the battery as the percentage just keeps dropping / doesn't charge up right?

I just fixed a iPhone 5s with the exact same symptoms. I ended up having to replace the charging port (It's a ribbon cable assembly that also comes with the bottom microphone and antenna cable on it.)

Better to try replacing the charging dock first, then if that doesn't work I suggest trying another battery.

The last resort is to get the U2 tristar charging IC replaced professionally by someone that does board level iPhone repairs.

Guide to replace charging port / dock:

iPhone 6 のLightningコネクターアセンブリの交換

Where to get the charging port / dock:

iPhone 6 Lightning Connector and Headphone Jack

Guide to replace battery:

iPhone6のバッテリーの交換

Where to get battery:

iPhone 6 Battery

iPhone 6 Batteryの画像

製品

iPhone 6 Battery

$29.99

iPhone 6 Lightning Connector and Headphone Jackの画像

製品

iPhone 6 Lightning Connector and Headphone Jack

$19.99

iPhone 6 バッテリーの画像

ガイド

iPhone6のバッテリーの交換

難易度:

普通

30 - 45 minutes

iPhone 6 Lightningコネクターアセンブリの画像

ガイド

iPhone 6 のLightningコネクターアセンブリの交換

難易度:

難しい

1 - 2 hours

このアンサーは役に立ちましたか?

スコア 6

コメント:

Sorry Sir, I forgot to tell these informaiton. I have another USB flex cable from another iPhone 6 and I know the charging port was/is ok. I just pressed it on the connector and pushed in the lightning cable. With gong I meant the sound coming up when pressing in the lightning cable. And only if the cable is disconnected the battery is used and gets weak and weaker. Currently at 14%. When lightning is connected it stays where it is. I had it laying here for 4 hours connected and it was not loosing any %

Edit : I just bought 5 batteries with 5 different APN's but as I heard there won't be a difference between battery APN's for the iPhone 6. Is this correct? Bought these in hope to fix the problem already, but I guess this won't be a success but I will update ASAP

さんによる

There won't be a difference to the point where it would affect how the battery would work. As long as it supports iPhone 6 they will all be compatible with it.

さんによる

look at Ben tearing it up!

Exactly what I would recommend. Start with the battery, might throw a new dock connector on as long as I'm in there, then go to board level stuff. To me...this really sounds like just a bad battery but there isn't a good way to be sure besides testing a new battery and throwing a meter on it.

さんによる

very funny guys it was really the battery :) I didn't think that. I thought it would be the chip but thanks so far

さんによる

コメントを追加

Hi see this https://youtu.be/smK8Lb38jWQ

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

richard さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 8,926