メインコンテンツにスキップ

2016年3月に発売された4インチのiPhone。ハードウェア仕様は6sに類似しています。シルバー、スペースグレイ、ゴールド、ローズゴールドのカラーが揃っています。16/64 GB容量、Model A1662とA1723

914回答 すべてを表示

My iPhone SE Stuck at 1%.

I replaced the LCD/Digitizer on a broken iPhone SE. I was not able to test it before the repair due to the screen not working. Now the phone reads that the battery is at 1% and it will stay on until the battery drains. I have tried a different battery. Any ideas on what to do next or what the problem might be?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 11

コメント:

i bought an iphone se 2 weeks ago it was going well and today suddenly i was using it and it was on 51 percent on lowerpowermode i used to put low power mode and suddenly it turned off andturned on showing 1 percent and then it showed again as 21 percent and i just waited for it and i put it to charge and waited and it was 51 percent my iphone was on ios 11.4 so i updated it and still the same i dont know why pls help me and a quick reply

さんによる

コメントを追加

6件の回答

選択されたソリューション

You could not test it before the new screen and even a new battery made no difference. If the Date/Time suggestion above does not work, it sounds like whatever caused the screen damage also damaged the logic board. You could have caused some Pry Damage or damaged an FPC connector during your repair.

Could you somehow fully charge a battery (in another 5S or SE) and then install it in the device? That would help you understand if the problem is charging related or elsewhere. Charging problems are usually related to a Tristar IC being defective or PRY / FPC damage mentioned above.

This is a difficult repair and unless you have the proper equipment or experience, I would recommend that you find a repair shop that can do micro-soldering repairs.

このアンサーは役に立ちましたか?

スコア 7

コメント:

Well idk if there is much you can do but the problem is is that your battery is fried and it needs to be plugged in every time you use it...believe me it happened to me too

さんによる

I have the same problem, I’ve replaced the screen and then the problem has occurred, however, after reading this comment I hit my phone twice on the wall and guess what! the battery is charging properly. I believe that there is cable is not connected well, If the problem occurred again I will install the screen again

さんによる

I Would second Minho, yet i would like to add little peace of info.

next the the battery connector on Iphone SE, there is tinny little components(capactiors & filter), one of these component is filter, if you knocked off thats filter during the process of replacing the battery, the phone wont be able to read the battery status which could cause rebooting/charging problems.

Regards

さんによる

コメントを追加
最も参考になった回答

Make sure that your iPhone’s data and Wi-Fi are on and connected

Open Settings -> General -> Date & Time

Toggle the switch for Set Automatically Off and On again. The switch will turn gray, then green.

Date & Time - iOS

Restart the iPhone by holding down the Sleep/Wake and Home button until you see the Apple logo

Once your device has restarted you should see the battery icon back to normal. Some users have also said that simply messing around with the date and time can also temporarily fix the error. Simply, toggle Set Automatically ON/OFF multiple times, or switch time zones as well.

このアンサーは役に立ちましたか?

スコア 10

コメント:

I created an account just to vote yes and tell you that for whatever reason, this fixed my phone so thank you.

さんによる

oh my gosh thank you so much !! i have been trying to find a solution for this problem for hours !! i too made an account just to thank you. i was freaking out when the toggle alone did not work but then i changed the time zone and then messed with toggle and everything worked perfectly !! i am eternally grateful.

さんによる

This has not worked for me

さんによる

This is worked for me as well as others, so thank you so much, I were stack on this more then month

さんによる

Amazing! How does this work? Well, it worked, and I also created an account to say Thank You :)

さんによる

4件以上のコメントを表示

コメントを追加

i had exactly the same issue with iPhone SE screen replacements for a long time (I repair phones for living) and i finally solved the puzzle. This happens due to pry damage. When you try to disconnect the battery connector with a prying tool, i used to nick the capacitor right beside the connector. Check with a microscope, you have to re solder it back on.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

Well I don't think there is too much you can do but I know the problem...your battery is fried..,now my battery is fried too and I have to plug oh in every time I use it

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

I have the same problem my iPhone6s is at 1% since I replaced the Lcd screen is not charging anymore but before I changed the Lcd screen it was charging fine what must I do now please help

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

I fixed it by letting the phone run all the way down until is shut off, the charging it. Fixed the problem for a month, then it recurred but same fix worked.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Michael さん、ありがとうございました!
統計データを表示:

過去 24時間: 7

過去 7 日: 56

過去 30 日: 295

今までの合計 66,818