評価: 1
1
Hi,
The screen on my daughter's phone won't light up. I'm able to restore the phone when connected to my macbook, so, it's powered on. That did not fix the problem. I opened it to ensure the connections were all secure and that did not fix the problem. One thing that is odd is that the phone does not vibrate or ping when plugged in. This leads me to believe it's something other than just a bad screen. Any thoughts?
Thanks.
評価: 181
3
This is caused when a wire becomes loose. A display flex cable may have been unplugged
To fix this, unplug the iPhone and open it up
On the bottom right there should be a long metal plate with 2 screws in it
Remove the screws and unplug the flex cable
This is the battery
Now do the same to the display flex cables.
Now plug in the Display flex cables only and secure the base plate to the display flex wires
After that go ahead and reconnect the battery
DO NOT POWER IN THE DEVICE YET
now put the plate back on the battery flex cable and carefully close the phone back up
Now try to power it on
TaDa! You should be powered on!
このアンサーは役に立ちましたか？
Hey Jake,
Thanks for your comment. I wasn't particularly detailed in describing what I did when opening the phone, but, this is essentially what I did and no luck. I'm thinking something else is going on since there's no sound and no vibration when I connect a usb cable.
I had this same issue while replacing my iPhone 5c screen and this fixed it for me
Try that but instead only unplug the battery
Did you experience the same issue where the phone was definitely on, but, it would not vibrate make sound in addition to the black screen?
Yes...not sure why this happens
I gave it a try just unplugging the battery first. No luck. Then, tried both the battery and the screen. Again no luck.
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 98
