メインコンテンツにスキップ

グーグル5番目のネクサスフォン。2013年10月31日に正式発表され、4.95インチ1080pディスプレイ、2.26GHz Snapdragonプロセッサ、LTEをサポート。Android 4.4.2、KITKATを搭載。製造はLG。

221回答 すべてを表示

Replaced my Nexus 5 battery door and now my screen goes black

I replaced my Nexus 5 battery door/back cover because I upgraded to a Nexus 5X and wanted to get it ready to sell. I bought an OEM replacement on eBay and it matched the phone at both being D821 parts. Oddly though ever since I did that the screen started having issues with occasionally going off, glitching, or just going black even though the backlight is still on and the phone is still working (i.e. the notification light flashes, it vibrates, makes notification tones, etc.). Over time it got worse and the screen wouldn't come back on after hard rebooting. Literally every time I take the battery door off it has zero issues with the screen when I restart it. I find this extremely odd and I've closely inspected the battery door and nothing looks out of place as far as contacts or anything else that could cause some kind of "short" or something like that.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

最も参考になった回答

This is strange... The only thing I can think of is the new door is making to much pressure and is disconnecting the screen cable... I would say look at the two doors and MAKE sure they are EXACTLY the same including length of things on the door...

このアンサーは役に立ちましたか?

スコア 1

6 件のコメント:

So funny you mention that. There's a little battery looking thing (I think magnet for wireless charging or mechanism for vibration) in the phone back. It came with a small black sticker on it that could be no thicker than a piece of paper. I removed the sticker and that helped for awhile and if I take the disc out completely it seems to help but then there's no haptic or vibration.

さんによる

OK ya that little disc it the magnet for the vibrator (the wireless charging should be unaffected) try putting the disc back but inverting th polarity (as in make the North Pole face opposing to the way it was before) you may have to fiddle with it so... Also try flipping it over...

さんによる

It can't be flipped because it's attached to a piece with two small spring contacts. Flipping it over would make those springs face the back of the case as opposed to the board where the contacts are.

さんによる

I see...... Well the only thing I can think of it (if you want to risk it) you can try to take the same unit from the other door and st glue it to the new one...

さんによる

P.S. There should be an orange ribbon cable over the battery is contains the video connections make sure that nothing is pulling on it and such, the connector for that cable is right below ware the disc things goes in...

さんによる

1以上のコメントを表示

コメントを追加

回答を追加する

Phil Schroeder さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 135