評価: 2.3千
7
5
1
Hi everyone
I have iPhone 5 that the rear camera doesn't work.
I have restore the phone to factory settings and replaced the rear camera and still no luck.
The camera is just black. Front camera working.
I disconnect the battery and connect it again.
Any more suggestions please help
Thanks
この質問は役に立ちましたか？
評価: 211
3
For example it's not the first time that I see this component u13 fail. If you can measure the rear camera tension on the line before this component but not after it you can remove it and run a jumper to restore the tension that allows the rear camera to work. It could also be one of the many filters or capacitors that are on the rear camera connector lines, they are a lot. It's not easy to find the problem and it's also more difficult to fix it without a microscope and some experience in microsoldering.
このアンサーは役に立ちましたか？
thank you very much for the support.
you're welcome
評価: 43
2
Take it to Apple ask them for a complete fresh install of iOS not just a restore
このアンサーは役に立ちましたか？
Any other suggestions different than taking it to Apple?
評価: 211
3
There are several component on the board that could have failed so there is not the right communication between the logic board and the rear camera. It is a microsoldering work, without the right equipment and skills you can't do anything more than that, I'm sorry. You could try another camera but it almost impossible that the two you have now are both faulty.
このアンサーは役に立ちましたか？
Hi James can you send me example of the components that may fail? Thank you
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 155
2 件のコメント
I have the same issue with an iPhone 5s.
Kris さんによる
Did you try to factory reset the phone with iTunes?
Mimi さんによる