修理を始めるには コミュニティ ストア

モデル番号A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 プロセッサ

330回答 すべてを表示

オプション

iMac does not start , does not turn diagnostic LEDs

My problem is due to a 27-inch iMac Late 2012 Quad Core Processor 2.9, was replacing the HDD of this machine, the Mac I then lit the job done. Shut down your Mac and try to light again but this no longer wanted to turn more.

I have tried to make it on again, and change the power supply, replace the battery of Mother Board, Remove all electronic parts and place in anti-static bags but the iMac does not react. When connecting your iMac to the electric current, is not none of the LEDs lights of diagnotico.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 2
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Check the wall plug. You should at least get #1 diagnostic light on if it is getting power.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

3 件のコメント:

Saw that my power cord esta working well, the perobarlo with another iMac.

Included with another probe power supply UN in good esatdo iMac .

Still not turn me any diagnostic LEDs . UN to Perform battery replacement Madre Y NO results have Baord .

Case I think it's a little more advanced by what is presented .

さんによる

I suspect that you got a bad replacement power supply. Use a multimeter to test if you are getting power to it. Thanks for the email and posting the question.

さんによる

Believe me it is a source taken from another iMac , which works in perfect condition. I think the problem esta linked to the logic board , appreciate any help from you or other members lls .

And thank you for the help .

さんによる

コメントを追加

回答を追加する

Claudio Castillo さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 385