メインコンテンツにスキップ

2015年3月に発表され、同年4月に発売されたGalaxy S6はGalaxyラインの中で最高のデバイスです。端にカーブが施されたスクリーンはGalaxy S6 Edgeです。

487回答 すべてを表示

No power after water damage repair

Dear all,

Samsung Galaxy S6 had been dropped in water - I did the usual clean and replace battery but still no power and no life from the usb connection.

The board looks good, although I havn't disassembled the daughter board as I'm expecting the device to at least vibrate once a good battery is connected to the main board.

Any ideas/advice?

I've got a daughter /dock connector board on order but I'm wondering how I can test/identify why no power is hitting this phone when all seems well?

Thanks!

Will

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

最も参考になった回答

By usual clean what do you mean? A proper water damage repair cleaning can be quite different than the standard cleaning methods, there is likely some underlying corrosion under any EMI shields that might be prohibiting the device from functioning. You could also (likely) have blown some fuses that disallow a boot.

このアンサーは役に立ちましたか?

スコア 1

3 件のコメント:

Sorry, I mean a 99.9% isopropyl bath and brush after removing all components and emi shields (except the daughter board).

I couldn't see any obvious damage to any fuses or capacitors but is there any test I can perform to detect any possibilitis?

さんによる

I have very limited knowledge on microsoldering but you could use a multimeter to check the resistance of components and identify where the short is.

さんによる

you have to get out the microscope and examine the board carefully. pay close attention to the battery connector plug area on the motherboard. Look for any signs of corrosion. You can also try changing out the power ic (there are 2 that commonly fail, youtube video by deep fix shows replacing one of them)

さんによる

コメントを追加

回答を追加する

Will さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,195