iMac display not working

Question

iMac Intel 21.5インチ EMC 2389

モデル番号A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3もしくは3.6 GHz Core i5プロセッサ

342回答すべてを表示

Shailender Rachamalla @shool_cool

評価: 13

1

投稿日: 2015年12月21日

オプション

iMac display not working

I have an iMac 2010, 21,5" which has hardrive problem and replaced it. While connecting its LCD with display connector cable, the cable got damaged at one end. I got new display-port connector cable, but still display is not working.

When I connected with external monitor, its working fine.

I asked at a local repair store they told me that it was either the LCD panel, or the SATA/Board (Logic board?) which would even be more expensive.

I thought its a LCD problem, got LCD from ebay but still the display is not working.

I did a SMC/PVRAM Reset, but this did not solve the problem.

I used flashlight and cant see anything on the internal screen.

My question is whether it's possible to determine if it is the logic board, cable connection, the Backlight controller or the LCD-Panel.

Thanks for your answers,

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

1件のコメント

Fans running at full speed too?

mayer さんによる2015年12月21日

コメントを追加

2件の回答

score 1 · Answer 1 · 2015-12-21T19:02:51-07:00

最も参考になった回答

Alex @alexfixtech

評価: 915

iSmartRepair - Smart devices & board repair

7

1

投稿日: 2015年12月21日

オプション

You should try the diag leds first to see if its the lcd. They are just above the mic connector on the logic board. The #4 led is green if the lcd is making connection with the motherboard. If the #4 led is green, maybe the motherboard defective because you changed the lcd and the lcd cable allready.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

2 件のコメント:

I did check the LED, #1 LED green, #2 LED green, #3 LED green but #4 LED is off.

Shailender Rachamalla さんによる2015年12月22日

If you allready changed the lcd and the lcd cable i am thinking about the motherboard connector. Try to change the lcd temp cable the thin one.

Alex さんによる2015年12月22日

コメントを追加