メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示
締切られた回答

Volume up and ringer buttons not working

My iphone fell off my desk. Volume up and ringer not working anymore. Volume down is working fine. The device is silent. All sounds work perfectly and when toggling silent through software, silent and unsilent modes work normally. No visible damage happened to the exterior of the iphone at all .

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

The shock could have damaged the button or the ribbon cable that connects the buttons to the motherboard. I had the same issue with the power button.

This guide will show you how to replace the cable/buttons: iPhone 4 Volume Button Replacement

iPhone 4 Headphone Jack & Volume Control Cable Replacement

iPhone 4 Volume Buttonの画像

ガイド

iPhone 4 Volume Button Replacement

難易度:

難しい

iPhone 4 Headphone Jack & Volume Control Cableの画像

ガイド

iPhone 4 Headphone Jack & Volume Control Cable Replacement

難易度:

難しい

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

Should i change them both or just the buttons. Since the volume down is working, doesn't this indicate that the cable is working ??

さんによる

The ribbon cable is very fragile, maybe a junction with the volume up button broke, but that is something that can only be tested when the phone is open. You could remove the physical buttons place the battery back and then push with a pen or so on the switch to see if it works then.

If not, the cable has to be changed.

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 156