メインコンテンツにスキップ

Appleがプロフェッショナルおよびパワーユーザー向けに提供するノートPCのラインです。現在、MacBook Proには13、14、15、16、17インチがあり、Pre-unibody(オリジナル)、unibody、Retinaディスプレイ、Touch Bar、SOC(システムオンチップ)設計によって大きな改訂が定義されています。

19983回答 すべてを表示

DVD/CD player does not function after replacing hard drive

I installed a greater capacity hard drive on a friends MacBook Pro.

The drive works perfectly, but the CD/DVD player will now recognize nothing--no CDs nor DVDs.

We don't live in the same country at the moment, so I can't reopen the case to look for the problem.

Any ideas as to the cause? I don't think I touched any other connectors, but perhaps I accidentally did.

Thanks

Stan Kossen

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

ベストアンサー

Go to the system profiler to see if the drive is even seen for a possible disconnect. I would reset the SMC and PRAM. How was the system restored on the new drive?

このアンサーは役に立ちましたか?

スコア 2

3 件のコメント:

Mr Mayer. Thanks for the response. The system was restored with a clean install of Snow Leopard.

さんによる

HOW did you do the clean install? If in target mode, was the processor a G5 or Intel?

さんによる

I think I misled. I clean installed Leopard before I changed the hard drive. I made a SuperDuper clone of the internal hard drive. Then I booted from the SuperDuper clone, and copied that to the internal hard drive.

It is has an Intel processor. Thanks for your interest and input.

Later I changed the internal HD, and it was then that the DVD no longer functioned.

さんによる

コメントを追加

回答を追加する

Stan Kossen さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,772