メインコンテンツにスキップ

モデル番号A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5もしくは2.8 GHz Core i7プロセッサ

430回答 すべてを表示

How reconnect display date cable?

When reconnecting the display data cable to the logic board on an EMC 2428, is there a trick to lining it up correctly? I assume that the connection is made by inserting the male cable to the female socket on the logic board by sliding it towards the top of the machine (the reverse of the disconnection), yes?. But I cannot get it to seat in the socket. I would hate to damage it.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2
コメントを追加

1 件の回答

最も参考になった回答

The only issue one faces is putting the plug in backwards. You may want to take some colored tape to mark across the connector & cable to help remind you which face is outwards.

The alignment is straight in and the wire bail holds the connection.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

dickson さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 270