メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

The iBook G3 was unveiled in July 1999 as Apple's portable computer for consumers.

316の回答 すべてを表示

What do I replace the original thermal materials with?

I am reinstalling my recently repaired logic board in my G3 900mhz iBook 14". The original thermal heat transfer materials on the heat sink were two preformed squares, the larger was a blue foam looking square, the other smaller one was gray and seemed to be a more solid version and consistency of thermal paste. Can I use the normal Arctic Silver paste for the installation or do I need to find the same type of original squares?

Thanks,

Randy

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 2

コメント:

Good question +

さんによる

Thank you, I'll give that a go.

Randy

さんによる

コメントを追加

1 件の回答

選択されたソリューション

Arctic Silver Thermal Paste will work great om the heat sink in your laptop.

Arctic Silver Thermal Pasteの画像

製品

Arctic Silver Thermal Paste

$8.99

この回答は役に立ちましたか?

スコア 2

コメント:

Thanks. Do you have a recommendation for the thickness of the paste? The iFixit instructions say to spread a thin layer. The original materials were fairly thick, maybe up to 1/16th of an inch.

さんによる

My experience in the matter is that it's better to have a bit too much than a bit too little. You just really need to make sure you don't have any that comes out over the edges / spills out when you reapply the heat sink. 1/16 " sounds fine to me, I just like to make sure I can't see the processor any more through the thermal compound.

さんによる

コメントを追加

回答を追加する

randy3833 さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,152