修理を始めるには コミュニティ ストア

2014年9月19日に発売されたiPhone 6の修理情報とガイドです。モデル番号 A1549、A1586、A1589。

4994回答 すべてを表示

オプション

Touch ID problems with original sensor

Hi guys, basically I smashed my iPhone 6 about a week ago I replaced the screen but in the process I tore the Touch ID extension flex that runs behind the LCD. I ordered a new flex cable from eBay and installed it. Home button now works flawlessly but Touch ID does not. Now when I try to setup a fingerprint it does not say failed or anything, it just acts as if it does not know that I'm touching the sensor. The reach ability function also does not work. I have reseated the cables at least 10 times and have also restore the phone in iTunes, but it still will not work. Please guys can anyone help ?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Try another long flex. As long as your original home button and the little flex is intact, this should be work. eBay parts are often defective.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

3 件のコメント:

Yeah I thought to try this, how comes if my long flex is defective when I restored it didn't throw an error 53 though ? Weird huh :D need to get this sorted asap though as Apple pay does not work :( also everything is intact I have look under a magnifying glass the the little Touch ID flex and j can't see anything wrong with it

さんによる

Yes I would think it would throw error 53 with bad long flex. Any chance you damaged the button itself?

さんによる

Don't think so, looked at it under a magnifying glass and it looks fine. No nicks or kinks. Just doesn't work

さんによる

コメントを追加

回答を追加する

Bradley Munro さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 160