メインコンテンツにスキップ

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答 すべてを表示

Enter DFU mode with broken power button?

The lock/power button on the phone is broken after it got wet. Phone was working fine for 2 weeks, now it's stuck on the Apple logo after resetting network settings. Can i enter DFU mode without a power button?

In more detail: I dried the phone in dessicant for some days , then it was working fine for 2 weeks or so , with the exception of the power button which was electronically stuck at the on position. (after booting up, the red power-off slider would appear as if the button was being pressed. I could tap Cancel and use the phone as normal, only the lock/power button would not do anything. )

Anyway the other day i decided to reset my network settings after trying out an app from the iTunes store that tweaks the packet size to supposedly increase 3G data speed. After the reset, the phone is stuck on the Apple logo. It stays there for a few minutes, then resets and gets stuck again, and so on until i turn it off by holding down the home button for a while.

Any chance of restoring the phone somehow? Is it the power button that is broken or could it be the motherboard?

Thanks !

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 5
コメントを追加

3件の回答

最も参考になった回答

Try this tutorial : http://www.technonix.com/2012/07/dfu-mod...

Works perfectly!

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

how do you know which is your device???

さんによる

コメントを追加

Here's How to put iPhone in DFU mode:

1. Start with your phone unplugged from your computer.

2. Hold the Sleep/Wake switch until you get the red slider and turn the phone off.

3. Start iTunes on your computer.

4. Hold the Home button down and keep holding it down while you plug the phone into your computer. Continue to hold the button down until you get a "iPhone detected...". Follow the screen instructions to restore.

このアンサーは役に立ちましたか?

スコア 1

3 件のコメント:

you little $@$*. You don't understand do you? The HOME BUTTON was not functional smart ass!

さんによる

you dumb $@$@ THE POWER BUTTON DOES NOT WORK. HOW IS HE SUPPOSED TO HOLD THE POWER BUTTON IF IT DOESN’T WORK.

さんによる

this will work with a broken power button ONLY on the off chance that you have the accessibility button thing already activated. Possibly also if you let the iphone die but that's unlikely to work.

さんによる

コメントを追加

use http://www.sebby.net/443-recboot-final-r...

awesome.

このアンサーは役に立ちましたか?

スコア 0

3 件のコメント:

there's nothing on that link, @max power

さんによる

the link doesn't work, @max power

さんによる

It might be because the question and answer are almost 1 1/2 yrs old.....:-)

さんによる

コメントを追加

回答を追加する

Colocon さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 28

過去 30 日: 86

今までの合計 40,810