メインコンテンツにスキップ

Mid 2010 Model A1278 / 2.4 もしくは 2.66 GHz Core 2 Duoプロセッサ

794回答 すべてを表示

My MacBook is still bleeping after a installed new RAM.

I've tried all 4 RAM sticks one at a time. But the macbook keeps bleeping how do I know what the problem is? Just once every 5 seconds. Is the RAM holder also replacable? Or is the logic board broken at one beep every 5 seconds

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

ベストアンサー

1 beep = no RAM installed

2 beeps = incompatible RAM types

3 beeps = no good banks

4 beeps = no good boot images in the boot ROM (and/or bad sys config block)

5 beeps = processor is not usable

In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.

https://support.apple.com/en-us/HT1547

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

Stef van den Berg さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 129