2012年9月12日に発表されたApple社による6番目となる iPhone。このデバイスの修理方法は前モデルと類似しており、スクリュードライバーと開封工具が必要です。GSMかCDMA方式、16/32/64 GB。 本体色は黒と白。

3322の回答 すべて表示

Replacement volume button did not have insert?

Hi, I wanted to replace my iphone 5 back cover and bought one from ebay. It came with power, silent and volume buttons. When I fixed the volume button, I found that it is looser than the original. Then I noticed that the original volume button has two small circular inserts stuck under them; but the replacement button only have an indent without the inserts. Without these inserts, the button did not work well. When the original is used, the phone volume control works well. How do I transfer these insert to the new button? Or should I buy one with them? A look at ebay pictures found that most DO NOT have these insert. Please advice.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

当社のショップを閲覧する

3回答

最も参考になった回答

Did you mean this part? And it's said it can be tore down, so you can try to move it from your old back cover to the new one.

この回答は役に立ちましたか?

スコア 2

コメント:

No, I meant the button itself. If you look at the back of the button you will see two thin circular metallic discs (inserts). In the replacement button that I bought, there are only two indents and there are no circular disc attached.

による

コメントを追加

Guys, I found that some buttons sold in ebay DO have these circular inserts. So buyers, if you are buying to replace your buttons or your back casing with buttons that goes with it, make sure that your volume buttons have these circular inserts and the power button has the small little ring/strip wire attached to it!

この回答は役に立ちましたか?

スコア 1
コメントを追加

You should be able to pry those metal discs off of the old button using a thin razor blade (be careful) and stick them to the new button.

この回答は役に立ちましたか?

スコア 1

コメント:

I have not been able to pry it; though it did move. Not wanting to wreck it, i didn't proceed. If someone knows how to do this, would be good to have it posted.

による

Using an X-ACTO blade I was able to get under the discs and remove them both in less than a minute. I doubt you will damage the button using this method.

による

OK, thanks. I think this is doable.

による

コメントを追加

回答を追加する

mtwtay さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 100