メインコンテンツにスキップ

Apple iPhone 5cは2013年9月10日に発表されました。このデバイスの修理は前モデルと類似しており、スクリュードライバーとこじ開けツールが必要です。GSM か CDMA、8, 16, 32 GB 、色は白、ピンク、黄色、ブルー、グリーンがあります。

1549の回答 すべて表示

Digitizer isn't working & LCD has lines

I own a repair shop and this is the second phone i've seen with this issue. A customer brings in a phone for a normal screen repair. The screen has lines on the left side of the LCD and the digitizer doesn't work at all. Both phones were in cases and both weren't dropped hard in fact it was on carpet. I replace the screen and it still has lines and digitizer doesn't work. After 4 screens i notice the lines are in the exact same place every time. I have no idea whats causing it or how to fix it. I need any help i can get.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

iPhoneのバッテリーキット

Only $29.99

Buy Now

iPhoneのバッテリーキット

Only $29.99

Buy Now

2回答

Maybe you need to check the screen FPC connector on the motherboard. If broken, replace it.

この回答は役に立ちましたか?

スコア 0

コメント:

Ive never heard of the FPC connector.

による

コメントを追加

This is a common problem with the iPhone 5C, it is caused by the digitizer connector on the logic board. It is a connector that has no metal clips at the ends causing it to be a weak connector.

この回答は役に立ちましたか?

スコア 0

コメント:

thank you very much but that doesn't explain the lines on the LCD.

による

I'm pretty certain this is the problem I have, I have recently replaced the screen and it immediately was acting erratic and unresponsive and is now even worse, I also put the previous screen back on and the same is occurring so I'm guessing connector damage. Although looking at it it doesn't appear damaged at all, is it possible there is no visible problem with the connector but it still be the culprit or may it be due to something else? If so is it worth replacing the connector?

による

コメントを追加

回答を追加する

Chandler Calvert さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 191