メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示

iPhone doesn't charge after screenreplacement, is now in boot loop

So I repaired an iphone 4 for a friend. Everything worked, battery life was normal, calling was great, bla bla bla. But after the battery died, he put the phone on the charger, but it just displays a dead battery with like 1% juice in red. If you power it on without charger, it shows the same screen, but with the 30 pin connector.

I ordered a new dock connector from ebay, and I replaced it, but now, when I power the phone on, it only powers on if connected to a wallet or pc. And when I power it on, it shows the apple logo for 3 seconds, goes black, and then again, shows the apple logo for 3 seconds and goes black.

I tried to start up the device without battery but it is still the same.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

Hey make sure that you reconnected the battery properly !

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Zied Banana さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 60