メインコンテンツにスキップ

モデル番号A1312 / Mid 2010 / 3.2 GHz Core i3もしくは2.8 & 3.6 GHz Core i5もしくは2.93 GHz Core i7, ID iMac11,3

382回答 すべてを表示

LED#1 turns on with one blink and stays on

Imac doesn't turn on, all other LEDs 2.3.4 stay off, only turns on by bypassing the SMC with full speed of fans and no display no Chime, # 2,3,4 LEDs stay off even when bypass the SMC.

Tested With:'

1. Different RAM.

2. Different Processors intel i5.

3. Tried to Turn without Graphic Card.

4. Without RAM.

NO Luck!

Have no idea about Output Voltages of Power Supply.

Any help Would Appreciate thanks.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

That LED only indicates startup voltage is present (power from mains to cord to board).

I do not have any schematics or information about output voltage from the PSU. Maybe some who does will chime in.

If this answer is acceptable please remember to return and mark it.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

adeel さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 155